锚式搅拌器

锚式搅拌器
　　

     锚式搅拌器桨叶外缘形状与搅拌槽内壁要一致，其间仅有很小间隙,锚式搅拌器可清除附在槽壁上的粘性反应产物或堆积于槽底的固体物，保持较好的传热效果。桨叶外缘的圆周速度为0.5～1.5m/s,可用于搅拌粘度高达 200Pa·s的牛顿型流体和拟塑性流体（见粘性流体流动。唯搅拌高粘度液体时，液层中有较大的停滞区。

Anchor agitator blade edge shape and stirred tank wall should be consistent, which is only a small gap, anchor agitator can remove the solid reaction product of adhesive on the wall of the tank or accumulated at the bottom, keep the good heat transfer performance. The circular velocity at the outer edge of the blade is 0.5 ~ 1.5m/s, can be used for Newtonian fluid mixing viscosity up to 200Pa · s and pseudo plastic fluid (see viscous fluid flow.Only the mixing of high viscosity liquid,a stagnant area larger liquid layer.

锚式搅拌器：http://www.yjcd.net/article/20131205155119.html